Cangzhou, Hebei, China
Response Time: < 24h
Response Rate: 0%
Model No.: ZYKM2546 | Brand: CANGHAI | Place of Origin: China |
Machine introduction:
1. The whole machine adopts computer PLC program to control each printing unit and phase adjustment of slotting and die cutting, which is convenient and reliable to operate.
2. The wall panels and important parts of the whole machine are all treated by aging and tempering to eliminate the internal stress of the metal; they are all produced by a high-precision machining center and ground by a CNC grinder. All drive rollers are made of high-quality steel, with high-precision computerized dynamic balance correction, hard chrome plating, and surface grinding.
3. The transmission gear is made of 40Cr high-quality alloy steel after grinding, and is ground by heat treatment. The Rockwell hardness of the tooth surface is HRC56-58, and the color registration accuracy is high.
4. Each unit of the whole machine is electrically separated, pneumatically locked, and pneumatically locked to ensure the stability of the unit, and the bell will continue to warn when walking to ensure the safety of operators.
5. The front and rear of the equipment are equipped with emergency stop switches.
6. The electrical appliances of the whole machine are of international well-known brands, the whole machine is reset to zero, the erasing memory and preset functions, the phase of printing slotting and die-cutting are reset to zero, and the phase pre-adjustment and fine adjustment functions can make the printing slotting and die-cutting phase adjustment time. Short and accurate.
7. The keyless connection ring is applied to eliminate the gap caused by the traditional connection and keep the printing color registration accurate for a long time.
8. The lubricating system of the whole machine adopts spray-type automatic lubrication, and an anti-seepage oil leakage mechanism is installed.
Main parameter
Type |
unit |
ZYM2546 |
Plate roller diameter |
mm |
820 |
Plate roller length |
mm |
4600 |
Inner width of machine |
mm |
4900 |
max speed |
Ps/min |
80 |
max printing size |
Mm |
2500×4600 |
max feeding paper size |
Mm |
2500×4650 |
min feeding paper size |
Mm |
600*950 |
board thickness |
Mm |
2.5-12mm |
machine wall thickness |
Mm |
60mm |
printing precision |
Mm |
≤±:0.75 |
die cutting precision |
Mm |
≤±:1.5 |
Main Power |
KW |
37 |
Min slot spacing |
Mm |
100 |
Dimensions(L*W*H) |
Mm |
6300*14500*3800 |