Cangzhou, Hebei, China
Response Time: < 24h
Response Rate: 0%
Model No.: LYKM2536 | Brand: CANGHAI | Place of Origin: China |
Machine introduction:
1. it adopts chain-paper feeding.
2. adopting QT400 Ductile iron gear driving
3. rockery interval adjustment device avoids central deviation of upper and lower knife rolls led by conventional adjustment, thus ensure balance operation rolls and clear print without double shadow.
4. auto cycling ink-feed system, roller lifted pneumatic and separate rotating.
5. all the axles of roller must be chrome –plating in order to increase the hardness
6. printing and grooving electric phase adjusting mechanism adopt planet type gear structure (it can be adjusted 360 degree while revolving and stopping)
7. electrically separation and pneumatic locking
8. module design, any combination of multicolor printing unit
9. auto count device to show right production volume.
Printing unit
1. High precision dynamic balance reticulate roller, fine printing effect.
2. The print phase roller could be adjusted electric digit control ranging from +10mm to -10mm
3. Each part is electric moving left and right with warning bell. When unit moving, the bell will be warning to make sure the operator safe. The moving motor with constant torsional moment which can buffer the impact of the two units when the operation is wrong. After all the parts closed, each part is pneumatic locked.
4. The ink distributing of the inking part adopts the rubber roller inking. The anilox roller usually always adopt 180#---240#, also can be chosed accord the customer use.
5. Inking system adopts pneumatic diaphragm pump inking with the ink cup to prevent the ink splashing. Pneumatic diaphragm pump inking can also adjust the volume of ink.
6. Pneumatic control up and down of the anilox roller to prevent the print plate two times be inking and to prevent the ink from being dried out and coagulative while short time stopping the machine. When the machine stop, the anilox roller and rubber roller could running independently for transmission ink and prevent the ink dry out.
7. There are early warning electric bell and rapid-stop button. In the production process, if there is an emergency, the can press early warning electric bell and rapid-stop button to stop the machine.
Slotunit
1. slotting knives set can horizontal movement, precision gear with smooth bar which plated with rigid chrome and grinded surface, movement flexible and accurate orientation of upper and lower cutting
2. the phase of slotting adjust by electric digital 360°, slot height by manual.
3. The press line wheel and slotting knives movement in a joint, control by manual
4. The slotting and press line interval adjustment adopt the self-lock structure
Main parameter
Type |
unit |
ZYM2536 |
Plate roller diameter |
mm |
820 |
Plate roller length |
mm |
3600 |
Inner width of machine |
mm |
3900 |
max speed |
Ps/min |
40 |
max printing size |
Mm |
2500×3600 |
max feeding paper size |
Mm |
2500×3750 |
min feeding paper size |
Mm |
600*950 |
board thickness |
Mm |
2.5-12mm |
machine wall thickness |
Mm |
60mm |
printing precision |
Mm |
≤±:0.75 |
die cutting precision |
Mm |
≤±:1.5 |
Main Power |
KW |
37 |
Min slot spacing |
Mm |
100 |
Dimensions(L*W*H) |
Mm |
6300*14500*3800 |